Akai ACAD100N Technical Information Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 38
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
9
ACAD100N
Detachable control panel3.3
Detaching the control panel
1
2
3
4
4
5
6
 Switch the power off.
 Press the OPEN button to release the panel.
 Pull the panel out.
Attaching the control panel
 Insert the left side of the control panel into the main
unit.
 Press the control panel right side until the “click”
sound is heard.
CAUTION
DO NOT insert the control panel from the right
side. It can damage the control panel.
 This control panel is not waterproof. Do not expose it
to water or excessive moisture
 Do not remove the control panel while driving your
car.
 Do not place the control panel on the dashboard or
nearby areas where the temperature rises high.
 To avoid damaging the control panel, do not push it
down or place objects on it while it is open.
 The rear connector that connects the main unit and
the control panel is an extremely important part.
oBe careful not to damage it by pressing on it with
fingernails, pens, screwdrivers, etc. Do not touch the
contacts on the control panel and the main unit, since
this may result poor electrical contact. If dirt or other
foreign substances get on the contacts, wipe them off
with a clean and dry cloth.
If the control panel is dirty, wipe off the dirt with
soft, dry cloth only. And use a cotton swab
soaked in isopropyl alcohol to clean the socket
on the back of the control panel.
Remote control3.4
In-
stalling the battery
 Press the catch and at the same time pull out the
battery tray.
 Insert 1 lithium battery, type CR2025 3V battery with
the stamped (+) mark facing upward. Insert the
battery tray into the remote control.
WARNING
 Store the battery where children cannot reach.
If a child accidentally swallows the battery, consult a
doctor immediately.
 Do not recharge, short, disassemble or heat the
battery or dispose it in fire. Do not expose or bring
into contact the battery with other metallic materials.
Doing this may cause the battery to give off heat,
crack or start a fire.
 When throwing away or saving the battery, wrap it in
tape and insulate; otherwise, the battery may give off
heat, crack or start a fire.
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 37 38

Comments to this Manuals

No comments