Akai ACAD100N Technical Information download pdf (Page 26)

TA9.5

TA SEEK mode

When newly tuned station does not receive TP

information for 5 sec, the radio retunes to next station

which has not the same station (PI) as the last station,

but has the TP information. When TP information gets

lost at the current station for retune time which is set by

RETUNE SHORT( 30 sec ) or RETUNE LONG (90 sec),

the radio start to retune to next same PI station.

When same PI station does not catch in 1 cyclic search,

the radio retunes to next station with TP information.

TA ALARM mode

When this mode is selected, any automatic retune mode

is not activated. Only double beep sound (ALARM) is

produced. In this mode, the unit keeps the current

station. (The higher priority is PI rather than TP.)

EONTA9.6

EONTA LOCAL mode

When the field strength level of EON linked is less than

the threshold level, the radio does not switch the station.

EONTA DISTANCE mode

EON TA switching is try to implemented by the

information of current station. When EONTA DISTANCE

mode is selected, “EONTA DX” on numeric display is

indicated for a few seconds.

REG9.7

Regional mode ON

AF switching or PI SEEK is implemented to the station

which have all PI codes the same as current station.

REG of individual segment is switched on also together

with displaying “REG ON” on numeric display for a few

seconds. * In double displaying mode, the individual

segment may be deleted in case of not enough- space

in display.

Regional mode OFF

The regional code in the format of PI code is ignored

when AF switching or PI SEEK is implemented. REG of

individual seg. is switched off together with displaying

“REG OFF” on numeric display for a few seconds.

PI9.8

When different PI sound (DIP) is heard once in a while,

the DIP’s sound will be heard for less than 1 second.

PI MUTE mode

Under the same situation, a mute sound will be heard for

less than 1 second.

RETUNE

The initial time of automatic TA search or PI SEARCH

mode is selected. When PI information is not caught for

retune time, the radio starts to retune to next same PI

station. When same PI station does not catch 1 cyclic

search, the radio goes to last station and waits for 4-5

minutes until PI code is received.

- RETUNE L mode: Selected as 90 seconds.

- RETUNE S mode: Selected as 30 seconds.

MASK

MASK DPI mode: masked only the AF which has

Different PI. MASK ALL mode: masked the AF which has

Different PI and NO RDS signal with high field strength.

System information9.9

 Tap SYSTEM button from setting menu screen to

show the information of the system.

Press the Program exit button to go back to

previous screen.

 Tap RESET button to restore GPS to the factory

default settings.

You can view detail system information including serial

number of the software.

Calibration9.10

 Tap CALIBRATION button from setting menu screen

to start calibration of the touch screen.

 When the target moves to another position, tap and

hold at the center of the new target.

 Repeat each time to complete the calibration process.

 When completed, tap anywhere in screen to go back

to menu screen.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 37 38

Comments to this Manuals

No comments

Akai ACAD100N Technical Information Page 26

Comments to this Manuals

Related products and manuals for Car media receivers Akai ACAD100N