Akai ACAD100N Technical Information Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 38
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
11
ACAD100N
ISO A CONNECTOR
NOTE
Depending on the manufacturer, the contacts
on your vehicle connection may be assigned
differently. This is not a defect of the device but
caused by a deviating connector pin
assignment by the manufacturer of your
vehicle. To provide a connection that conforms
to this device, please purchase an appropriate
adapter cable from a specialized dealer if
required. Please consult a specialist in your
area if you have any questions about the
connections.
A4 YELLOW (B+): Connection for +12V operational
voltage (diameter at least 2.5 mm²) to permanent
plus of the vehicle.
A5 BLUE: To system control terminal of an external
amplifier or Automatic Antenna (max. 100mA /
12Vdc).
A7 RED ACC (+): Connection for +12V trigger voltage.
Connect to ignition key of the vehicle. If contacts A4
and A7 are switched, the device will “forget” the
stored stations after the ignition is turned off.
A8 GND (- /Ground): Attach the connection for the
ground (diameter at least 2.5 mm) to the ground of
the vehicle.
ISO B CONNECTOR
)URQWVSHDNHU
B3 Right + (Gray)
B4 Right - (Gray/Black)
B5 Left + (White)
B6 Left - (White/Black)
5HDUVSHDNHU
B1 Right + (Violet)
B2 Right - (Violet/Black)
B7 Left + (Green)
B8 Left - (Green/Black)
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 37 38

Comments to this Manuals

No comments