Akai ACAC110UC Operator's Manual download pdf (Page 13)

TECHNICAL INFORMATION

CD/MP3 PLAYER SECTION

Signal to noise ratio > 60 dB

Channel separation > 50 dB (1kHz)

Frequency response 20Hz - 20 kHz

TUNER (FM)

Frequency range 87.5 -108 MHz

Sensitivity 2.8 µV

Stereo separation 30 dB

Signal to noise ratio 50 dB

Channel step 50 kHz

Intermediate frequency 10.7 MHz

LINE-OUT

Output 350 mV

Impedance 10k Ohm

GENERAL

Power supply 12V DC (10.8-15.6V allowable)

Power consumption 10A

Standby power consumption under 10 mA

Speaker impedance 4 or 8 Ohm

Output power 40W x 4CH

Note: Specifications and the design are subject to possible modification without notice due to

improvement.

Disposal of Used Electrical & Electronic Equipment

The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not

be treated as household waste. Please, dispose of this equipment at your applicable collection point for the

recycling of electrical & electronic equipments waste. In the European Union and Other European countries

which there are separate collection systems for used electrical and electronic product. By ensuring the correct

disposal of this product, you will help prevent potentially hazardous to the environment and to human health,

which could otherwise be caused by unsuitable waste handling of this product. The recycling of materials will

help conserve natural resources. Please do not therefore dispose of your old electrical and electronic equipment

with your household waste. For more detailed information about recycling of this product, please contact your

local city office, your household waste disposal service or the shop where you purchased the product.

For more information and warranty conditions,

please visit : www.akai.eu

1 2 ... 8 9 10 11 12 13

No comments

Akai ACAC110UC Operator's Manual Page 13