Akai ACAC105UC User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 22
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
11
ACAC105UC
!
CAUTION
Do not insert the control panel from the right side. It can damage the
control panel.
This control panel is not waterproof. Do not expose it to water or
excessive moisture.
Do not place the control panel on the dashboard or nearby areas where
the temperature rises high. Instead, keep the control panel in the
protective carrying case.
To avoid damaging the control panel, do not push it down or place objects
on it while it is open.
The rear connector that connects the main unit and the control panel is an
extremely important part. Be careful not to damage it by pressing on it
with ngernails, pens, screwdrivers, etc. Do not touch the contacts on the
control panel and the main unit, since this may result in poor electrical
contact. If dirt or other foreign substances get on the contacts, wipe them
off with a clean and dry cloth.
General functions5.2
To switch on the appliance, press the POWER button (1). To switch off the
appliance, press the POWER button (1) again.
● To select the source mode (AUX, TUNER, CD-MP3, USB, MMC/SD), press
the MODE button (6). Press the SELECT button (3) to conrm the selection.
To adjust the volume level, turn the VOLUME dial (3) until the desired
level is set.
To mute or restore sound, press the MUT button (2).
To access the BASS control, press the SELECT button (3) once. To adjust
the level, turn the VOLUME dial (3) until the desired level is set.
To access the TREBLE control, press the SELECT button (3) once again.
To adjust the level, turn the VOLUME dial (3) until the desired level is set.
To access the BALANCE control, press the SELECT button (3) once
again. To adjust the level, turn the VOLUME dial (3) until the desired level
is set.
To access the FADER control, press the SELECT button (3) once again.
To adjust the level, turn the VOLUME dial (3) until the desired level is set.
To connect an external audio device, insert the cable plug in the LINE IN
receptacle (17).
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Comments to this Manuals

No comments