Akai Multi Video Processor RMD-V3104U User Manual download pdf (Page 21)

MVP MANUAL

7. PICTURE FRAME ADJUSTMENT PROCEDURES

Adjust the MVP picture frame as follows.

(1) Connect the RS-232C cable to the MVP panel.

(Refer to (P.141) "Connection with MVP external computer”.)

(2) Initialize the picture frame data in RAM.

ex. &L0 (31 (Refer to &L command.)

(3) Set to the magnified screen to be adjusted.

ex. M11C22 3) (Refer to the M command, @ command.]

(@9 31)

(4) Perform coarse adjustment of the picture frame.

ex. &P21 3) ++—3] (Refer to the &P command.)

(5) Perform fine adjustment of the picture frame.

ex. &G0 31 LLRU 3 (Refer to the &G command.)

(6) Repeat steps (4) and (5) for every position on the screen.

(7) Save the adjustment data in the EEPROM.

ex. &W1 (Refer to the &W command.)

1. Command reference

(1) To shift to the operation mode [! command]

Input: ! 3

Explanation: By executing this command when the power is on, various commands can be executed.

(2) To set different screens for adjusting convergence [DFFC command]

Input: DFFC3

Explanation: • By executing this command, the V IN input image will be displayed on a single 1x1 display.

• Use the crosshatch, etc. for V IN input images.

• For convergence adjustment, refer to the MPJ's adjustment items.

(Returning to 4-screen enlarged display)

• The V IN input image is set to 4-screen enlarged display by @^T|. (For the @ commands, refer to

page 148.)

147

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 48 49

No comments

Akai Multi Video Processor RMD-V3104U User Manual Page 21